Stripped NorthWind

Darrells · Post by **Darrells** » Sat Jul 09, 2011 11:33 pm

It's almost time to make her really shine. Hatch lips are installed and the boat is ready for varnish. Just need to give the epoxy time to cure a bit. It won't be long and I will give her the maiden voyage. I am getting pretty excited about paddling this boat.

Manjimike · Post by **Manjimike** » Sun Jul 10, 2011 1:28 am

Really gorgeous

Darrells · Post by **Darrells** » Sun Jul 10, 2011 10:54 pm

Which one should I use for the hatch straps????? I have red, blue and black bungee cord so I can make which ever one work.

Probably Tuesday I'll give her a light sanding to rough up the epoxy a little and spray the first coat of varnish on.

Manjimike · Post by **Manjimike** » Sun Jul 10, 2011 11:04 pm

I like the black one - I only ever see plain straps here

Cheers
Mike

Ossie Bruce · Post by **Ossie Bruce** » Mon Jul 11, 2011 4:35 am

It is the black for me, makes the timber stand out!

Whirly · Post by **Whirly** » Mon Jul 11, 2011 5:19 am

Mate, I'm with Bruce, go the Black

Post by **jem** » Mon Jul 11, 2011 5:48 am

black "flame" is unique.

Manjimike · Post by **Manjimike** » Mon Jul 11, 2011 5:56 am

Is it readily available?
Wouldn't mind it for myself.

Cheers

Mike

Darrells · Post by **Darrells** » Mon Jul 11, 2011 7:50 am

www.strapworks.com

They have any color or combination imaginable and also hardware to go with it.

Manjimike · Post by **Manjimike** » Mon Jul 11, 2011 8:06 am

Thanks Darrell

JEM Watercraft

Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind

Re: Stripped NorthWind