JEM Watercraft

Latest update. Inside glassed so onto bulkheads and deck sub frames.
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]
Planing 12'' deck halves
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

Deck halves glued up
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

continued, Gluing down deck
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]
Rough cutting decks.
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]
Sanding and radius edges ready for glass
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

some more. laying out cloth on fordeck
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]
Wetting out the glass.
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]
After fill coats edged scraped sanded, ready for overall sanding and varnish.
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

Almost done, overall sanding after fill coats then 1st coat of varnish, 4 more to follow at 24 hour intervals. Need to make seat and carry handles, install watertight deck plates, and float test.
Then either my buddy will come get it, or I'll carry it up when I go to the Sail Oklahoma event 1st week in Oct.
[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]
Oh yes almost forgot, will graphite bottom as well.

MM

nice! The amber tint in the epoxy really makes the wood grain pop.

Done ready to deliver and splash this coming weekend

[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

[URL=http://s469.photobucket.com/user/m ... .jpg[/img][/url]

MM

WOW , That is a Head-turner.
You have done an outstanding job on that TV , it is one good looking boat that anyone would be proud to be seen paddling it.

I second that!

Very nice indeed..

WOW!!!
Bob