Builder show and discuss their progress.
adam
Posts: 2 Joined: Mon Jun 04, 2007 8:19 amType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Puszczykowo, Polska
Contact:
Post
by adam Tue Jun 05, 2007 1:37 am
Hello everybody.
I want to show my boat wich I have build with my fater.
Its not the end but I cant wait to try merrimac on the water
Its great!!! I feel real free.
It was not so easy to build boat first time, but now....
I feel real happy, that I found jemwatercraft and this forum
Thank you very much everybody
See you on the water
www.kanu.freehost.pl pozdrowienia z Polski
jem
Site Admin
Posts: 4916 Joined: Fri Jun 18, 2004 8:14 pmType of boat I like: WoodenLocation: Greensboro, NC
Contact:
Post
by jem Tue Jun 05, 2007 6:10 am
great work!
-Matt. Designer.
surfman
Posts: 229 Joined: Tue Apr 25, 2006 3:00 pmType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Lutz-Steinhatchee, FL
Contact:
Post
by surfman Tue Jun 05, 2007 8:05 am
Nice job Adam, once you get that seat mounted inside the boat it will lower your center of gravity and make the boat much more stabil. Looks good.
Tight Lines, Steve
Oldsparkey
Design Reviewer
Posts: 1272 Joined: Sat Jun 19, 2004 11:08 amType of boat I like: Wood boats .Location: Somewhere around Central Florida
Contact:
Post
by Oldsparkey Tue Jun 05, 2007 12:26 pm
AdamWWW .. (the W onderful W orld of W ood boats) and I hope you get to have a lot of time out paddling in yours.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at
The Southern Paddler
hairymick
Design Reviewer
Posts: 1965 Joined: Wed Jan 04, 2006 8:54 amType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Queensland, Australia
Contact:
Post
by hairymick Tue Jun 05, 2007 5:51 pm
Hi Adam,
Gday from Australia
and welcome aboard mate.
Nice job
Regards,
adam
Posts: 2 Joined: Mon Jun 04, 2007 8:19 amType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Puszczykowo, Polska
Contact:
Post
by adam Wed Jun 06, 2007 1:38 am
thanks
Of course, seats should be inside, I know
It was only test
Now I have two seats inside boat and yoke from jemwatercraft (thank you again)
I have to make picture and show you.
pozdrowienia z Polski
surfman
Posts: 229 Joined: Tue Apr 25, 2006 3:00 pmType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Lutz-Steinhatchee, FL
Contact:
Post
by surfman Wed Jun 06, 2007 7:48 am
adam wrote: It was only test
Yea I knew that. You just couldn't wait to get it wet.
Tight Lines, Steve
jem
Site Admin
Posts: 4916 Joined: Fri Jun 18, 2004 8:14 pmType of boat I like: WoodenLocation: Greensboro, NC
Contact:
Post
by jem Wed Jun 06, 2007 8:04 am
It's a pretty good idea to do it like this. You can get a feel for where the ideal paddling postion is (lengthwise).
-Matt. Designer.
surfman
Posts: 229 Joined: Tue Apr 25, 2006 3:00 pmType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Lutz-Steinhatchee, FL
Contact:
Post
by surfman Wed Jun 06, 2007 8:10 am
Yes, I intend to do the same thing. I am going to make my seat adjustable though because I may have changing load requirements. Only the back seat will be movable though.
Tight Lines, Steve
