Mick
It is looking like a mighty fine boat. I especially like the grain in the wood for the deck , that is pretty.
It is pleasing to see the progress going along at such a rapid rate and I am looking forward to when it is done and you ship it over here to me for a trail paddle. "O" ... You will clean out all of that dust in it before you ship it over here .. I hope. I would hate to get my paddling clothes all dusty when paddling such a fine looking craft.
As I told you earlier ... I should be able to get it back to you in a few years , 10 or 12 ........ at the earliest. I am not sure but I might even get Kayak Jack to try it for a few more years .... Just to make sure it is a fun paddling boat and to get his opion on it.
I will be watching the mail and looking forward to the delivery of such a fine paddling craft.
Chuck.
PS..... If Matt behaves himself I might even stop by his place on my way north to Jacks and let Matt look at it ... But only from a distance , you know the way they make folks stand back to look at race cars , collectibles and priceless items.
Hairie"s South Wind Build.
-
- Design Reviewer
- Posts: 1272
- Joined: Sat Jun 19, 2004 11:08 am
- Type of boat I like: Wood boats .
- Location: Somewhere around Central Florida
- Contact:
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
-
- Posts: 200
- Joined: Mon Jul 31, 2006 6:32 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Palm Bay, FL (east coast)
-
- Design Reviewer
- Posts: 1272
- Joined: Sat Jun 19, 2004 11:08 am
- Type of boat I like: Wood boats .
- Location: Somewhere around Central Florida
- Contact:
Matt .... "O" ..... Matt , You po misguided soul , You should never , ever , in a million years say anything like that , The answers I could come up with are beyond the numbers that anyone could conceive , think or dream of in this universe.jem wrote:Chuck has been smoking that gator tail again.
You might say that door needs to be shut to keep the riff raft out and I will be nice and close it for you since I would dearly hate to wear out this keyboard answering it.
The opportunity of a life time and I pass it up........ QUICK someone COMITTE ME. Walking out the door just shaking my head an listing to the rattling sounds coming from the inside..........
Chuck.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
-
- Design Reviewer
- Posts: 1965
- Joined: Wed Jan 04, 2006 8:54 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Queensland, Australia
- Contact:
Thanks guys, I reckon this one is a winner.
wet out time,
First coat,
Second coat,
Bow Shot
Autumn has finally arrived here with beautiful mild, balmy days, and nice cool nights. will be able to get a lot done in the next few days.
wet out time,
First coat,
Second coat,
Bow Shot
Autumn has finally arrived here with beautiful mild, balmy days, and nice cool nights. will be able to get a lot done in the next few days.
Regards,
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
-
- Design Reviewer
- Posts: 1965
- Joined: Wed Jan 04, 2006 8:54 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Queensland, Australia
- Contact:
Workin on the coamings. These are not as per the plans but I like this style of coaming better. My boat will be tied upside down on the roof racks and be sitting on the coamings. I just thought these would take the load a little better.
More sanding
Coaming fillet
Bow shot
More sanding
Coaming fillet
Bow shot
Regards,
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
-
- Posts: 21
- Joined: Tue Sep 19, 2006 9:12 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: UK
-
- Design Reviewer
- Posts: 1965
- Joined: Wed Jan 04, 2006 8:54 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Queensland, Australia
- Contact:
Hi Steve,
Thanks mate.
Coming together now!!
Bottom cleaned up ready for the first coat of graphite enriched epoxy
Cockpot coaming cleanup
Cockpit cleanup
Thanks mate.
Coming together now!!
Bottom cleaned up ready for the first coat of graphite enriched epoxy
Cockpot coaming cleanup
Cockpit cleanup
Regards,
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
-
- Design Reviewer
- Posts: 1965
- Joined: Wed Jan 04, 2006 8:54 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Queensland, Australia
- Contact:
Bottom is graphited. first coat.
Bloody native bees
These ae the mounts for a rudder. I installed them before mounting the deck. Much easier to do then than later.
I got a bit adventurous with some paint following Chucks lead with the pin stripe on his lovely Freedom.
Bloody native bees
These ae the mounts for a rudder. I installed them before mounting the deck. Much easier to do then than later.
I got a bit adventurous with some paint following Chucks lead with the pin stripe on his lovely Freedom.
Regards,
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Mick
JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)