Hairymicks Wadefish (kadaitchi)

Builder show and discuss their progress.
Post Reply
hairymick
Design Reviewer
Posts: 1965
Joined: Wed Jan 04, 2006 8:54 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Queensland, Australia
Contact:
Contact hairymick

Post by hairymick »

Hey! Mick has more clamps than me, and they all match. No fair! "Kym....I need to go buy some more clamps!"
:lol: :lol: so do I :lol: :lol:


You're making great progress! Being several steps behind you and seeing how you build your kayak is really helping me out!
Hi Scott, thanks mate. Starting to come together now :D

OK got a little more done on the fiddly bits today. :D

fore hatch lid is glassed
Image

Tankwell is made. Another coat of resin tomorrow and in she goes.
Image

Rear deck is cut, fitted & glassed

Image

Started cutting the rear hatch coaming lip corners.
Image

Foredeck is cleaned up and the joining seam is taped.

Image
Regards,
Mick

JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Top
Kayak Jack
Design Reviewer
Posts: 1186
Joined: Sun Jun 20, 2004 8:03 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: South-central Michigan

Post by Kayak Jack »

scottrunnr wrote:Mick, brilliant suggestion to get a dremel! I picked one up and it made the horrible task of cleaning up the hull interior prior to glassing much easier! ...
I'm trying to resist another toy. I'm grimly hanging on here. Slipping ... slip p ing ... ... s l i p .. p ...
Kayak Jack
Doing what you like is FREEDOM
Liking what you do is HAPPINESS
I spent most of my money on whiskey and women - and I'm afraid I just wasted the rest.
Top
hairymick
Design Reviewer
Posts: 1965
Joined: Wed Jan 04, 2006 8:54 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Queensland, Australia
Contact:
Contact hairymick

Post by hairymick »

Heya Jack,

Next to my bandsaw and power sanders, it is the most used tool in my shop now. it is certainly he most versatile.

Look closely at the coaming lip in the last pic. Now, imagine sanding that edge right against the deck with anything else. I just put a little bobbin head and drum on ran right round the whole coaming in about 7 minutes.

To get into the tight corners, change bits to a pointed grind stone, - another 5 minutes and all done :D :D - Best hundred bucks I ever spent.

C'mon mate, ya want one, ya know ya do :D :D :D :twisted:


Oh yeah, I allmost forgot, You can also get all manner of neat little cutting heads for some real flash wood carving and shaping :D Ideal for pairng away minute bits to make that perfect joint look special.
Regards,
Mick

JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Top
Oldsparkey
Design Reviewer
Posts: 1272
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:
Contact Oldsparkey

Post by Oldsparkey »

Mick

I have one that use to be my Dad's. It is in a nice metal box with all sorts of attachments. It is one of the handiest things for working around the house.

Never have used it on a boat but might give it a try or get one of the new ones with the adjustment for the Rpm's so it won't run wide open all the time. The flex cable would even be better. :D ( That brings back some nice memories )

More like when I was doing my dentistry thing in the service for Uncle Sam.

Now if I could get my hands on one of those old cable driven drills with the swing arm and foot control that I used in the military during that ( Non War in the 60's ) .... "O" Boy that would be nice. I could do some inlay work that would be out of this world. Plus the patient would not need any happy gas or an injection ( Pain Killer ) during the operation (drilling).

Chuck.
Don't ask ... I live for today ... Not Yesterday , Yesterday is dead and gone , they call that History. Only Today and Tomorrow counts...Just like back then. Do what you can to help anyone , the rewards are great. :D
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Top
Kayak Jack
Design Reviewer
Posts: 1186
Joined: Sun Jun 20, 2004 8:03 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: South-central Michigan

Post by Kayak Jack »

A DENTIST??!! Doc Holiday of the paddling world?
Kayak Jack
Doing what you like is FREEDOM
Liking what you do is HAPPINESS
I spent most of my money on whiskey and women - and I'm afraid I just wasted the rest.
Top
Oldsparkey
Design Reviewer
Posts: 1272
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:
Contact Oldsparkey

Post by Oldsparkey »

Kayak Jack wrote:A DENTIST??!! Doc Holiday of the paddling world?
And a dam better shot then he was. :wink: I don't miss. ( Ancient history ) Plus I can make a lot better boat.
About the boats ... that is today and everyday that is to come to us down some river .... Lets enjoy that to the fullest in a boat we make and have pride in. :D

Chuck.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Top
hairymick
Design Reviewer
Posts: 1965
Joined: Wed Jan 04, 2006 8:54 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Queensland, Australia
Contact:
Contact hairymick

Post by hairymick »

Hi guys,

Been a little busy these last couple of days.

A couple more piccies. :D

rear deck is tacked on
Image

Mid deck is fitted, glassed and ned pours are done
Image
Regards,
Mick

JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Top
hairymick
Design Reviewer
Posts: 1965
Joined: Wed Jan 04, 2006 8:54 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Queensland, Australia
Contact:
Contact hairymick

Post by hairymick »

Couple more,

Cockpit hatch acess to fish cooler is cut
Image

Cockpit is in :D :D

Image
Regards,
Mick

JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Top
scottrunnr
Posts: 389
Joined: Sun Apr 23, 2006 8:34 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Brookline, MA

Post by scottrunnr »

Mick,
are you going without self-bailing scuppers?
Top
hairymick
Design Reviewer
Posts: 1965
Joined: Wed Jan 04, 2006 8:54 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Queensland, Australia
Contact:
Contact hairymick

Post by hairymick »

D'oh!!

I just knew I forgot something. :oops:

good pickup mate. :D

I plan to istall some venturi style drains out the sides of the cockpit and tank well. I needed to get theem stuck in place so I can work out proper angles etc.That is my story and I'm sticking to it :D :lol:

I think big holes stuck in the bottom of a boat will only create unnecessary drag.
Regards,
Mick

JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
Top
Post Reply

Return to “Builder Log”