Here we go again. tomorrow back to the box store for wood.
Ron
Laker 18 A Cuda 2
-
tx river rat
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Laker 18 A Cuda 2
Last edited by tx river rat on Wed Jul 01, 2009 10:41 am, edited 1 time in total.
-
jbo_c
- Posts: 69
- Joined: Sat Aug 23, 2008 9:39 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Albany, GA
Re: 18 A
Are there drawings? I went through the other post and couldn't decide what this was. If I understand, it's an extension of some design. Which one?
Jbo
Jbo
-
jem
- Site Admin
- Posts: 4916
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
Re: 18 A
It's pretty much a Laker except that is asymmetrical (from a top view: the max beam is shifted aft a little for a "Swede Form" hull) and Ron is doing his own deck design.
The Bow and stern heights were also lowered per Ron's request. It's a pure flat water racer that should turn out to be pretty dang fast.
The Bow and stern heights were also lowered per Ron's request. It's a pure flat water racer that should turn out to be pretty dang fast.
-Matt. Designer.
-
tx river rat
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Re: Laker 18 A Cuda 2
Matt
Do you have any ideal where the seat should be mounted. I noticed in the other boats that are asymmetrical it takes a farther back seating position.
Ron
Do you have any ideal where the seat should be mounted. I noticed in the other boats that are asymmetrical it takes a farther back seating position.
Ron
-
jem
- Site Admin
- Posts: 4916
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
Re: Laker 18 A Cuda 2
You'll want your hips about 19" forward of #4 station. Hope that makes sense.
-Matt. Designer.
-
LIGHT KEEPER'S KID
- Posts: 212
- Joined: Thu Dec 18, 2008 11:42 am
- Type of boat I like: WADEFISH 15x32
- Location: Round Rock,Texas___Wadefish 15x32 (OlllllO)
Re: Laker 18 A Cuda 2
Ron i hate to tell u.but u need to go the Doc u've got it BAD 
it loks like your building so many boats that i can't keep tract
Mike
it loks like your building so many boats that i can't keep tract Mike
The wise man in the storm prays to God, not for safety from danger, but for deliverance from fear.
__Ralph Waldo Emerson
__Ralph Waldo Emerson
-
tx river rat
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Re: Laker 18 A Cuda 2
Mike
I am going to combine several boat ideals into the WTV and build this boat to play with,just two going.
Ron
I am going to combine several boat ideals into the WTV and build this boat to play with,just two going.
Ron
-
LIGHT KEEPER'S KID
- Posts: 212
- Joined: Thu Dec 18, 2008 11:42 am
- Type of boat I like: WADEFISH 15x32
- Location: Round Rock,Texas___Wadefish 15x32 (OlllllO)
Re: Laker 18 A Cuda 2
Oh,just two i can't get one started 
Mike
i can't get one started Mike
The wise man in the storm prays to God, not for safety from danger, but for deliverance from fear.
__Ralph Waldo Emerson
__Ralph Waldo Emerson