stripped deck

Ask your questions here. Guests welcome to post!
Post Reply
Darrells
Posts: 347
Joined: Wed Oct 22, 2008 10:20 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Lorena,texas

stripped deck

Post by Darrells »

About how thick are the strips cut for a deck?
Darrell Sykora
jem
Site Admin
Posts: 4916
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: stripped deck

Post by jem »

1/4" [6mm] is the standard.
-Matt. Designer.
Darrells
Posts: 347
Joined: Wed Oct 22, 2008 10:20 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Lorena,texas

Re: stripped deck

Post by Darrells »

Matt, Can the panels on the Freedom be built out of strips while flat and then assembled as craiggamesh did with his Pirogue.
Darrell Sykora
jem
Site Admin
Posts: 4916
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: stripped deck

Post by jem »

I'm guessing no. There's some twist in the Freedom panels where are there's only a bend in the pirogue panels.
-Matt. Designer.
Post Reply