Southwind 15-30 question

Ask your questions here. Guests welcome to post!
Post Reply
Jimmy W
Posts: 129
Joined: Mon Sep 10, 2007 10:15 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: north Georgia, USA

Southwind 15-30 question

Post by Jimmy W »

Matt
On the Southwind 15-30, Sheet 1.1, panel 4B, what are the measurements at the station just before the midpoint of the panel. This would be at one foot in from the end on the plywood. On my plans it is blank.

Jimmy
Top
jem
Site Admin
Posts: 4916
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:
Contact jem

Post by jem »

I left those off because the end of the panel is right there and you can shape the curve without the those dimensions.

But they would be 7-7/16 and 11-7/16.
-Matt. Designer.
Top
Jimmy W
Posts: 129
Joined: Mon Sep 10, 2007 10:15 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: north Georgia, USA

Post by Jimmy W »

Thanks Matt
I thought that the batten would probably follow the curve close enough, but feel better with the measurements.

Jimmy
Top
jem
Site Admin
Posts: 4916
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:
Contact jem

Post by jem »

No problem.
-Matt. Designer.
Top
Post Reply

Return to “Questions & Comments”